Huawei R100020G1 Скачать руководство пользователя страница 13

Страница: 13 / 53

Working Mode

The R100020G1 charging module supports low-voltage and high-voltage modes

and provides full power output to be compatible with various vehicle models and

ensure fast charging. The charging module can be set to silent mode or standard

mode according to noise requirements.

Table 2-1 Working mode

Voltage Mode

Noise Mode

Silent Mode

Standard Mode

Automatic switching

Supported

Manual switching to

high voltage

Supported

Manual switching to low

voltage

Supported

The charging module works in automatic switching mode by default. It

automatically switches to the low-voltage or high-voltage mode based on the

output port voltage, preset voltage, or battery voltage reported by the monitoring

module.

The automatic switching mode of the charging module can be set to any of the

following:

1. Automatic switching based on the module output port voltage (factory

default)

2. Automatic switching based on the preset voltage
3. Automatic switching based on the battery voltage reported by the monitoring

module

Manual switching is also supported. You can manually switch to the low-voltage

or high-voltage mode on the system monitoring module.

●

Low-voltage mode: The output voltage ranges from 150 V DC to 500 V DC. At

20 kW constant power, the output voltage ranges from 300 V DC to 500 V DC.

●

High voltage mode: The output voltage ranges from 150 V DC to 1000 V DC.

At 20 kW constant power, the output voltage ranges from 500 V DC to 1000 V

DC.

The charging module works in standard mode by default. You can set it to silent

mode on the system monitoring module based on the noise reduction

requirements.

●

Silent mode: The power is derated in this mode. The noise of the charging

module does not exceed 55 dB in any scenario.

R100020G1 Charging Module

User Manual

2 Overview

Содержание R100020G1






















































Результаты поиска

Содержание R100020G1

Отзывы:

Huawei R100020G1, Руководство пользователя, Страница: 13 / 53

Результаты поиска

Содержание R100020G1

Отзывы: