increment-command
[
command-number
command-number
]
command-text
command-
text
The command list is edited.
5.
Run:
increment-run
[
group-by
{
device-type
device-type
|
ip
{
ip-address
[
to
ip-address
] } &<1-10> |
member-number
{
member-number
[
to
member-
number
] } &<1-10> } ]
The result whether commands in the command list are sent to the specified member
switch is displayed.
–
Only the last execution result of the incremental configuration is saved.
–
The member selection mode can be device type-based, member switch ID-based,
IP address-based, or all.
–
If you use the ID of an existing command during the process of editing the
command list, the command will be overwritten.
–
To delete the existed incremental configuration command, run the
undo
increment-command
{
command-number
command-number
|
all
} command.
–
To check the list of incremental configuration commands that is currently edited,
run the
display increment-command
command.
l
Synchronizing configuration files
Do as follows on the administrator switch:
1.
Run:
system-view
The system view is displayed.
2.
Run:
cluster
The cluster view is displayed.
3.
Run:
increment-config synchronization
[
group-by
{
device-type
device-type
|
ip
{
ip-address
[
to
ip-address
] } &<1-10> |
member-number
{
member-
number
[
to
member-number
] } &<1-10> } ]
The result whether configuration files of the specified member switch are
synchronized to the FTP server is displayed.
–
The member selection mode can be device type-based, member switch ID-based,
IP address-based, or all.
–
This command is valid only after the cluster is enabled.
l
Configuring security features
Do as follows on the administrator switch:
1.
Run:
system-view
The system view is displayed.
2.
Run:
cluster
Quidway S9300 Terabit Routing Switch
Configuration Guide - Network Management
8 HGMP Configuration
Issue 03 (2010-09-20)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
8-27
