Huawei Quidway S3526, Начало работы

Страница: 206 / 894

Command Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Chapter 1 Static Route Configuration Commands
Huawei Technologies Proprietary
1-9
1.1.5 display ip routing-table ip-prefix
Syntax
display ip routing-table ip-prefix ip-prefix-name [ verbose ]
View
Any view
Parameter
ip-prefix-name : ip prefix list name.
verbose : With the parameter, this command displays the verbose information of both
the active and inactive routes that passed filtering rules. Without the parameter, this
command displays the summary of the active routes that passed filtering rules.
Description
Using display ip routing-table ip-prefix command, you can view the route information
that passed the filtering rule according the input ip prefix list name.
If there is no specified address prefix list, this command will display the verbose
information of all active and inactive routes with the parameter verbose and it will
display the summary of all active routes without the parameter verbose .
Example
# Display the summary of the active route that is filtered ip prefix list abc2.
[Quidway] ip ip-prefix abc2 permit 10.1.1.0 24 less-equal 32
[Quidway] display ip routing-table ip-prefix abc2
Routes matched by ip-prefix abc2:
Summary count: 2
Destination/Mask Protocol Pre Cost Nexthop Interface
10.1.1.0/24 DIRECT 0 0 10.1.1.2 Vlan-interface1
10.1.1.2/32 DIRECT 0 0 127.0.0.1 InLoopBack0
For detailed description of the output information, see Table 1-1.
# Display the verbose information of the active and inactive routes that are filtered
prefix list abc2.
[Quidway] display ip routing-table ip-prefix abc2 verbose
Routes matched by ip-prefix abc2:
Generate Default: no
+ = Active Route, - = Last Active, # = Both * = Next hop in use
Summary count: 2
**Destination: 10.1.1.0 Mask: 255.255.255.0