Huawei Quidway S3526, Начало работы

Страница: 608 / 894

Command Manual - Security
Quidway S3500 Series Ethernet Switches
Chapter 1 802.1x Configuration Commands
Huawei Technologies Proprietary
1-7
View
System view/Ethernet port view
Parameter
user-number
: Specifies the limit to the amount of supplicants on the port, ranging from 1
to 256.
By default, the maximum user number is 256.
interface interface-list
: Ethernet interface list including several Ethernet interfaces,
expressed in the format
interface-list
= {
interface-num
[
to interface-num
] } & < 1-10 >.
interface-num
specifies a single Ethernet interface in the format
interface-num
=
{
interface-type interface-num
|
interface-name
}, where
interface-type
specifies the
interface type,
interface-num
specifies the interface number and
interface-name
specifies the interface name. For the respective meanings and value ranges, read the
Parameter of the Port Command Manual section.
Description
Using
dot1x max-user
command, you can configure a limit to the amount of
supplicants on the specified interface of 802.1x. Using
undo dot1x max-user
command, you can restore the default value.
This command is used for setting a limit to the amount of supplicants that 802.1x can
hold on the specified interface. This command has effect on the interface specified by
the parameter
interface-list
when executed in system view. It has effect on all the
interfaces when no interface is specified. The parameter
interface-list
cannot be input
when the command is executed in Ethernet Port view and it has effect only on the
current interface.
For the related commands, see
display dot1x
.
Example
# Configure the interface Ethernet 0/1 to hold no more than 32 users.
[Quidway] dot1x max-user 32 interface Ethernet 0/1
1.1.7 dot1x port-control
Syntax
dot1x port-control
{
auto
|
authorized-force
|
unauthorized-force
} [
interface
interface-list
]
undo dot1x port-control
[
interface interface-list
]
View
System view/Ethernet port view