Huawei Quidway S3500 Series, Руководство по эксплуатации

Страница: 212 / 671

Operation Manual - Routing Protocol
Quidway S3500 Series Ethernet Switches
Chapter 4 OSPF Configuration
Huawei Technologies Proprietary
4-24
4.2.29 Resetting the OSPF Process
If the undo ospf command is executed on a router and then the ospf command is used
to restart the OSPF process, the previous OSPF configuration will lose. With the reset
ospf command, you can restart the OSPF process without losing the previous OSPF
configuration.
Perform the following configuration in user view.
Table 4-30 Resetting the OSPF process
Operation Command
Reset the OSPF process reset ospf { all | statistics }
Resetting the OSPF process can immediately clear the invalid LSAs, make the
modified Router ID effective or re-elect the DR and BDR.
4.3 Displaying and Debugging OSPF
After the above configuration, execute display command in any view to display the
running of the OSPF configuration, and to verify the effect of the configuration. Execute
debugging command in user view to debug the OSPF module.
Table 4-31 Displaying and debugging OSPF
Operation Command
Display the brief information of
the OSPF routing process
display ospf brief
Display OSPF statistics display ospf cumulative
Display LSDB information of
OSPF
display ospf [ area-id ] lsdb [ brief | [ asbr |
ase | network | nssa | router | summary ]
[ ip-address ] [ originate-router ip-address |
self-originate ] ]
Display OSPF peer information display ospf peer [ brief ]
Display OSPF next hop
information
display ospf nexthop
Display OSPF routing table display ospf routing
Display OSPF virtual links display ospf vlink
Display OSPF request list display ospf request-queue
Display OSPF retransmission list display ospf retrans-queue
Display the information of OSPF
ABR and ASBR
display ospf abr-asbr