24
2
Installing and Routing Fibers
Installing and Routing Fibers
－
Upward Cabling
When handling optical fibers, do not stand close to or look into the optic al fiber outlet directly with naked eyes.
If the two fiber holes have insufficient space for the fibers, you can also route fibers through the cable hole.
The pipe should extend into the cabinet by certain length so that the fibers routed in the cabinet is not in contact
with the upper beam.
The bend radius of the fiber must be greater than its minimum curvature radius. Specifically, the minimum
curvature radius for the 2 mm fiber jumper is 40 mm.
Bundle the fibers to ensure that the fibers do not contact the cabinet door.
