7
2e
Installing storage devices into the cabinet
To avoid device damage, do not stack any components but install them onto guide rails.
If you remove controllers and disks for easily moving and installing enclosures, record the slots of these
controllers and disks in advance. This helps you insert controllers and disks back to their correct slots later. If a
controller is inserted into a different location, a system power-on failure may occur.
NOTICE
2f
(Optional) Installing disk modules
If disks have not been installed into the storage devices, install
the disks before installing the storage devices. To ensure high
performance for heat dissipation, insert disks in the sequence of
disk slot IDs.
If the disk module is not fully configured, cover filler panels over
vacant disk slots. If disks have been installed into the storage
devices, skip this procedure.
2g
(Optional) Installing filler panels
