To avoid personal injury or device damage, arrange for at least three persons to carry and install an enclosure.
Before you handle devices, wear ESD clothes, wear a pair of ESD gloves or an ESD wrist strap, and remove
conductive objects such as ornaments and watches.
Do not operate devices or handle cables on a stormy day.
To avoid eye injuries, do not look into the optical outlets without eye protection.
To avoid electric shock, do not wear an ESD wrist strap during the power-on process.
Scenario 1
Wearing an ESD wrist strap whose
ground terminal is a plug
Scenario 2
Wearing an ESD wrist strap whose
ground terminal is a metal clip
Safety Information
CAUTION
Do not remove or insert controllers, disks, or cables during the power-on process to prevent data loss.
Ensure that a storage system is properly grounded before powering it on to prevent the storage system from
being damaged.
NOTICE
2
Wearing ESD gloves
Wearing an ESD wrist strap
(1) Stretch your hand through the ESD wrist strap.
(2) Fasten the buckle. Ensure that the wrist strap tightly touches the skins.
(3) The ESD wrist strap can be classified into the ESD wrist strap with a plug and the ESD wrist strap
with a metal clip.
To wear the ESD wrist strap, do as follows:
Insert the plug of the ESD wrist strap into the ESD socket of the cabinet.
Clip the metal clip of the wrist strap to the square hole on the side of the cabinet.
