13
After the storage system is powered on, do the following to initialize it.
1. Modify the IP address of the management network port through CLI (before this operation, you need to
connect the serial port on the controller enclosure to a maintenance terminal).
2. Install the ISM (on the maintenance terminal).
3. Modify the password of the administrator.
After the storage system is initialized, you are recommended to install the following host software on the
application server.
UltraPath: for how to install the UltraPath, see the
OceanStor UltraPath for Windows User Guide
,
OceanStor
UltraPath for Linux User Guide
, and
OceanStor UltraPath for AIX User Guide
.
The initial value for the IP address of the management network port is 192.168.128.101 or
192.168.128.102. The default subnet mask is 255.255.255.0.
The default name of the storage system is "admin", and the password is "Admin@storage". You are
advised to change the default login password immediately after you have logged in to the storage
system for the first time, and to periodically change your login password in the future. This reduces
the password leakage risks.
For details on how to initialize the storage system, see the
OceanStor Dorado2100 Storage System
Installation Guide
.
If faults occur during power-on, seek help from the
OceanStor Dorado2100 G2 Storage System Troubleshooting
.
For questions about technical support and service, contact your service provider.
For questions about upgrades, contact your local sales office.
Installing Front Panels
Initializing the Storage System
Installing Host Software
How to Obtain Help
HUAWEI TECHNOLOGIES CO., LTD.
Huawei Industrial Base Bantian Longgang Shenzhen
518129
People’s Republic of China
enterprise.huawei.com
Obtain the documentation for the UltraPath from the delivery-attached CD-ROM.
Installing the front panel for the 2 U device
After checking that the storage system is powered on normally, install front panels for a neat appearance.
