11
Power On Devices
1
Switching On the External Power Sources
3
Checking the Status Indicators on the Controller Enclosure (Front View)
Switching on the external power sources of the devices in the following sequence:
Disk enclosures
→
controller enclosure
→ switch (for SAN) → application server.
Before you power on the system, ensure that you have connected the disk enclosures to the controller
enclosure.
The power-on process takes about ten minutes. The disk enclosures start after the controller
enclosure is started.
Check the status indicators after the devices are powered on.
When the storage system is powered on, the colors of the indicators vary with the port speeds.
For details, see the
OceanStor Dorado2100 G2 Storage System Installation Guide
.
2
Pressing the Power Button on Controller Enclosure
Power indicator of the
controller enclosure
Green on
Green on
Disk running indicator
Each controller enclosure has a hot spare disk, which resides in slot 24 (the rightmost slot on the front panel).
4
Checking the Status Indicators on the Disk Enclosure (Front View)
Each disk enclosure has a hot spare disk, which resides in slot 24 (the rightmost slot on the front panel).
Power indicator of the
disk enclosure
Green on
Green on
Disk running indicator
