manualshive.com logo in svg

Huawei NE40E-X1, Описание аппаратуры, Страница: 19 / 158

Поделиться
Скачать
Huawei NE40E-X1 Скачать руководство пользователя страница 19

Table 1-5

 Technical specifications of the fan module for the NE40E-X1

Parameter

Value

Outline
dimensions
(W x D x H)

50 mm x 226 mm x 130 mm ( 1.97 in. x 8.90 in. x 5.12 in. )

Weight

1.1 kg ( 2.43 lb )

Maximum
power
consumption

100 W

Maximum
wind
pressure

477.2 Pa

Maximum
wind rate

64.4 cubic feet per minute (CFM)

Noise

64.3 dB

 

Table 1-6

 Description of the indicators on the fan module

Indicator/Button

Description

FAN indicator

When the indicator is steady green, it indicates that the fan module
works normally.
When the indicator is off, it indicates that the fan module is
unregistered, powered off, or has a hardware fault.
When the indicator is steady red, it indicates that the fan module fails.

 

1.4 Data Plane

1.4.1 Introduction to the Data Plane

As key parts of the NE40E-X1, Network Processing Units (NPUs) are responsible for data
processing and data switching between Physical Interface Cards (PICs) and NPUIs.

The procedure for data processing is as follows:

1.

The IP packets sent from PICs and 2x10G interfaces on an NPU converge at a convergence
module.

2.

The Network Processor (NP) processes the IP packets.

3.

The Traffic Management (TM) module performs traffic management on the IP packets.

4.

The Fabric Interface Chip (FIC) performs IP packet switching.

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

1 NE40E-X1 Hardware Description

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

11

Содержание NE40E-X1































































































































































Отзывы:

Нет отзывов