manualshive.com logo in svg

Huawei NE40E-X1, Описание аппаратуры, Страница: 109 / 158

Поделиться
Скачать
Huawei NE40E-X1 Скачать руководство пользователя страница 109

Table A-10

 Description of the buttons and indicators on a flexible card

Indicator/
Button

Status

Description

STAT indicator

Green

If the indicator is steady green, it indicates that
the flexible card works normally.
If the indicator is off, it indicates that the
flexible card is not powered on or fails to be
registered.

Yellow

If the indicator is steady yellow, it indicates
that the FPIC is installed in a slot for a HIC
and an alarm is reported or the FPIC is not
loaded with the logic.

Red

If the indicator is steady red, it indicates that
the hardware of the flexible card is faulty.

LINK/ACT

Green

If the indicator is steady green, it indicates that
the link is Up.
If the indicator blinks green, it indicates that
data is being transmitted.
If the indicator is off, it indicates that the link
is Down.

LOS1/LOS2

Green

If the indicator is steady green, it indicates that
optical signals are normal.
If the indicator is off, it indicates that the
optical module is not installed.

Red

If the indicator is steady red, it indicates that
optical signals are lost.

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

A List of Indicators

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

101

Содержание NE40E-X1































































































































































Отзывы:

Нет отзывов