Huawei NE40E-X1 Скачать руководство пользователя страница 104 | Manualshive

Страница: 104 / 158

Huawei NE40E-X1 Скачать руководство пользователя страница 104

Table A-4

Description of the buttons and indicators on the NPU panel

Indicator/Button

Status

Description

STAT indicator

Green

If the indicator is steady green, it indicates that the
NPU works normally.
If the indicator blinks green, it indicates that the NPU
is being registered.
If the indicator is off, it indicates that the NPU is not
powered on or fails to be registered.

Red

If the indicator is steady red, it indicates that the
hardware of the NPU is faulty.

ACT indicator

Green

If the indicator is steady green, it indicates that the
NPU is in the master state.
If the indicator is off, it indicates that the NPU is in
the slave state or fails to be registered.

OFL indicator

Red

If the indicator is steady red, it indicates that the NPU
is powered off and can be safely removed.
If the indicator is off, it indicates that the NPU works
normally.

L/A0 indicator

Green

If the indicator is steady green, it indicates that the
corresponding link is Up.
If the indicator blinks, it indicates that data is being
transmitted.
If the indicator is off, it indicates that the
corresponding link is Down.

L/A1 indicator

Green

If the indicator is steady green, it indicates that the
corresponding link is Up.
If the indicator blinks, it indicates that data is being
transmitted.
If the indicator is off, it indicates that the
corresponding link is Down.

OFL button

-

This button indicates the removal of the NPU. Before
removing the NPU, you need to press and hold the
OFL button for six seconds until the OFL indicator
is turned on. Then, the board can be removed safely.

A.1.5 Indicators on a Flexible Card

describes the indicators on a flexible card.

HUAWEI NE40E-X1 & NE40E-X2 Universal Service
Router
Hardware Description

A List of Indicators

Issue 02 (2011-09-10)

Huawei Proprietary and Confidential

Copyright © Huawei Technologies Co., Ltd.

96

«
...
102
103
104
105
106
...
»

Содержание NE40E-X1































































































































































Отзывы:

Нет отзывов