Step 6 For details about how to commission IP cameras and set parameters for them, see
the documentation delivered with the equipment or obtain the documentation by
referring to the "Preparing Documentation" section.
1. Preview the site situation in real time and check the camera coverage through
videos. Adjust the lens if necessary.
2. (Optional) Configure an SD card if the VCN or IVS1800 is not configured.
3. Choose Settings > Video/Audio/Image > Video Settings, and set camera
stream type, primary stream, and secondary stream 1 parameters, as
shown in the following figures.
NO TICE
Set the encoding protocol to H.265.
Figure 4-13 Setting primary stream parameters
IVS1800 Video Management System
User Manual
4 Commissioning the IVS1800
Issue 02 (2021-01-27)
Copyright © Huawei Technologies Co., Ltd.
34