Huawei HES-319M, Руководство по установке

Страница: 5 / 40

HES-319M Installation 5
2. Introduction to the HES-319M
Comparison: HES-319M, BreezeMAX PRO 3000, BreezeMAX PRO 6000
Because WiMAX is a regulated standard, manufacturers must conform to a strict set of specifications. As a
result, all WiMAX CPEs are quite similar and familiarity with one helps you when starting up with another.
The following table compares the BreezeMAX PRO 3000, BreezeMAX PRO 6000, and HES-319M to provide a
starting point for those familiar with the BreezeMAX PRO CPEs and new to the HES-319M.
Item BreezeMAX PRO 3000 BreezeMAX PRO 6000 HES-319M
Static IP support Yes Yes, with firmware
01.00.12.999 or later No
Base Station Support Supported by all base
stations. Supported by all base
stations. On base stations
operating from
3475MHz to
3600MHz.
ODU Location
Requirements The location requirements detailed in the
WiMAX Customer Premise Equipment Installation guide apply to all.
Mounting Mount so sides are at 45° to
the horizontal. Mount so sides are at 45° to
the horizontal. Mount so top and
bottom are at 0° to
the horizontal, with
interface side on the
bottom.
Mounting Kit Included Included Included
Cat5e Cables Specialty cable with
integrated sealing gland
assembly from surge
suppressor to ODU.
Integrated sealing gland
assembly not required for
surge suppressor to IDU. Cable with integrated
ground wire recommended
for surge suppressor to
ODU.
Stand-alone sealing gland
assembly.
Integrated ground wire not
required for surge
suppressor to IDU. Same as BreezeMAX
PRO 6000
Ground wire (if not
integrated) 12AWG