4
Installing the iBOX
2.3
iBOX
iBOX
UPS scenario
1. Install the antenna delivered with the iBOX.
Ensure that the antenna is perpendicular to
the floor.
2. Attach the iBOX to the top or side of the BCB
box, and press the iBOX with your palm for
more than 10 seconds to ensure that the
fastener is attached firmly and evenly.
Install the iBOX on the corresponding BCB box.
Cable Label
iBOX Port
Battery1_HALL1
HALL_1
Battery1_HALL2
HALL_2
Battery2_HALL3
HALL_3
Battery2_HALL4
HALL_4
Battery3_HALL5
HALL_5
Battery3_HALL6
HALL_6
Battery4_HALL7
HALL_7
Battery4_HALL8
HALL_8
Cable Label
iBOX Port
Battery1_HALL1
HALL_1
Battery2_HALL2
HALL_2
Battery3_HALL3
HALL_3
Battery4_HALL4
HALL_4
Without a neutral wire
For cables with labels Hall+, Hall-, Hall_1, and Hall_2, connect the terminal labeled Hall+ to the
positive Hall effect sensor, connect the terminal labeled Hall- to the negative Hall effect sensor,
and connect the terminals labeled Hall_1 and Hall_2 to the corresponding ports on the iBOX
according to the cable connection sequence.
NOTE
