16
10.9
(Optional) Installing a IVS1800
1. Install hard disks.
a. Remove the two black screws on the rear of the chassis cover, and take off the
chassis cover
。
b. Remove two black screws on each side of the chassis and the silvery white one on top of
the hard disk tray, raise the hard disk tray by 45 degrees, and take out the upper and then
lower layers of hard disk tray.
c. Place the hard disks with ports facing upwards and align the screw holes on the hard
disk tray with the hard disks and fasten the screws.
d. Insert the hard disk tray back at 45 degrees with the opening of its locking buckle facing
downwards, hold the screw in the red-framed part to lower the hard disk tray until it is level,
and fasten the black screws on the left and right sides and the white screw on the top.