eSpace IAD104H
Quick Start
6
FAQs
Issue 10 (2019-04-09)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
44
If you forget the password of the
system
user, see the
eSpace IAD
Troubleshooting Guide
.
4.
Q: How do I restore the IAD to factory settings?
A: Log in to the CLI, and run the
enable
and
configure
terminal
commands in sequence to enter the global
configuration mode. Then run the
restore vendor-config
command. Restart the IAD for the settings to take effect.
5.
Q: How to restart the IAD?
A: Log in to the CLI, and run the
enable
and
configure
terminal
commands in sequence to enter the global
configuration mode. Then run the
reboot
command.
6.
Q: How do I view the IP address of the IAD?
A: Use a network cable to connect a PC to the LAN port
on the IAD, and enter
telnet 192.168.100.1
in the
Run
dialog box to log in to the IAD. The default user name is
root
, and the default password is
huawei123(For
V300R001,the password is admin)
. In the privilege
mode, run the
display ipaddress
command to display the
IP address. For details, see the
eSpace IAD Product
Documentation
.
7.
Q: How do I change the IP address of the IAD?
A: For details, see
Maintenance
>
Changing IP address
in the
eSpace IAD Product Documentation
.
8.
Q: How do I view the MAC address of the IAD?
A: Log in to the CLI, and run the
enable
and
configure
terminal
commands in sequence to enter the global
configuration mode. Then run the
display mac-address
command.
9.
Q: How do I view the physical sequence number of the
IAD?
A: Log in to the CLI, and run the
enable
and
configure
terminal
commands in sequence to enter the global
configuration mode. Then run the
display
physical-serial-num
command.
10.
Q: How do I view the elabel of the IAD?
