eSpace IAD104H
Quick Start
4
Manual Configuration (CLI)
Issue 10 (2019-04-09)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
27
Verification
After the preceding configuration is complete, the IAD runs
properly. You can verify the configuration results by checking
indicators and voice communication.
Choose
MGCP Service Configuration
>
MG
to access
the MG configuration page to view the user registration
status. If the
Registered
state is displayed, it indicates
that the corresponding phone is registered successfully.
You can verify calls. If calls can be performed or received
successfully, it indicates that the data is configured
correctly.
If a fault occurs, you need to check whether the data is
correctly configured. If the fault persists, see
eSpace IAD
Troubleshooting Guide
to locate the fault.
4.4 Connecting to the IMS (SIP)
The IAD104H can connect to the IMS directly or through
SoftSwitch. If the IAD connects to the IMS through
SoftSwitch, configure the IAD according to the scenario where
the IAD connects to the IP PBX. This topic describes the
scenario where IAD users directly register with the IMS. After
configuring data on the IMS, configure the IAD104H so that
the IAD104H can provide voice services, including basic call
and fax services.
Data Plan
You can obtain the connection data between the IAD and the
IMS from the network carrier or network administrator. The
following describes how to enable the voice function for an
IAD104H user.
