Huawei EM770 Скачать руководство пользователя | Manualshive

Страница: 68 / 68

background image

HUAWEI EM770 HSPA PC Embedded Module V100R001

Product Specification

Issue 1

(2008-09-15)

Huawei Confidential: This documents is Huawei Proprietary and Confidential(NDA
Required).It may not be duplicated, neither distributed externally without
prior and written permission of Huawei.

Page

68 of 68

Specific Absorption Rate (SAR)

Your wireless device is a radio transmitter and receiver. It is designed not to exceed
the limits for exposure to radio waves recommended by international guidelines.
These guidelines were developed by the independent scientific organization ICNIRP
and include safety margins designed to assure the protection of all persons,
regardless of age and health.

The guidelines use a unit of measurement known as the Specific Absorption Rate, or
SAR. The SAR limit for wireless devices is 2.0 W/kg and the highest SAR value for
this device when tested complied with this limit.

Regulatory Information

The following approvals and notices apply in specific regions as noted.

CE Approval (European Union)

The wireless device is approved to be used in the member states of the EU. The
wireless device is in compliance with the essential requirements and other relevant
provisions of the Radio and Telecommunications Terminal Equipment Directive
1999/5/EC (R&TTE Directive).

Federal Communications Commission Notice (United States): Before a wireless
device model is available for sale to the public, it must be tested and certified to the
FCC that it does not exceed the limit established by the government-adopted
requirement for safe exposure.

The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg)
averaged over one gram of tissue. The highest SAR value reported to the FCC for
this device type was compliant with this limit.

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.

The antenna(s) used for this transmitter must be installed to provide a separation
distance of at least 20 cm from all persons.

Warning:

Changes or modifications made to this equipment not expressly approved

by HUAWEI may void the FCC authorization to operate this equipment.

fo

r f

ai

thgo

far

«
...
66
67
68

Содержание EM770





































































Отзывы:

Нет отзывов

Похожие инструкции для EM770

ACS850-04 series

Бренд: ABB Страницы: 296

Бренд: ABB Страницы: 320

Бренд: ABB Страницы: 50

Бренд: ABB Страницы: 56

Бренд: Samsung Страницы: 32

Бренд: Manfrotto Страницы: 16

Бренд: Yardney Страницы: 8

Бренд: HandyTrac Страницы: 14

Бренд: TA Страницы: 6

Бренд: NAD Страницы: 4

Бренд: NAD Страницы: 4

Бренд: olympia electronics Страницы: 10

Бренд: Omnex Страницы: 9

Бренд: Omegon Страницы: 6

Бренд: WATERLOO Страницы: 8

Бренд: S&P Страницы: 17

Бренд: S&S Northern Страницы: 9

Бренд: Samson Страницы: 6

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды