9
solid on. The POWER indicator is also solid on, which indicates that the HG521 is
working properly.
3
Setting the Network-Access Parameters
By configuring the HG521 and your computer, you can choose any of the following
methods to surf the Internet:
z
Accessing the Network Through the Embedded PPP Dial-Up Software on the
HG521
z
Accessing the Network Through the PPP Dial-Up Software on Your Computer
3.1
Accessing the Network Through the
Embedded PPP Dial-Up Software on the HG521
If you select this method for accessing the network, the HG521 starts to set up a dial-up
connection automatically after the startup. You can access the network after you power
on your computer. You do not need to install any special dial-up software on your
computer or perform dial-up operations on your computer. To configure the HG521 and
your computer for the network access, do as follows:
Step 1
Log in to the Web-based configuration utility of the HG521.
1.
Launch the Internet Explorer on your computer. Enter
http://192.168.1.1
in the address bar, and then press
Enter
.
2.
In the displayed dialog box, enter the user name and the password, and
then click
OK
.
By default, both the user name and the password are
admin
. After the user name and
the password are verified, you can access the Web-based configuration utility.
Step 2
Enable the embedded dial-up function.
1.
In the navigation tree on the left of the Web-based configuration utility,
choose
Basic
>
WAN
.
2.
Click
New
.
3.
Select
Enable
check box for
WAN connection
.
4.
Enter the VPI and VCI that are provided by the network operator in the
VPI/VCI
text boxes.
5.
Select
INTERNET
from the
Service list
drop-down combo box.
6.
Select
Route
from the
Connection mode
drop-down combo box.
7.
Select
PPPoE
option button for
Connection type
.
8.
Select
Enable
check box for
NAT
.
