9
Service Mode
Working Method
Configuration
IPoA
z
Take the HG520b as a router.
z
The HG520b uses the static
public IP address to access the
Internet.
z
Use the IPoA encapsulation
mode to encapsulate the
packets.
Refer to 3.4
"Configuring
the IPoA
Mode."
RFC2684B
z
Take the HG520b as a router.
z
Use the static IP address or the
IP address dynamically allocated
by the ISP.
z
Use the IPoE/IPoA
encapsulation mode to
encapsulate the packets.
Refer to 3.5
"Configuring
the RFC2684B
Mode."
PPPoE
z
Take the HG520b as a router.
z
Use the embedded PPPoE
dial-up software of the HG520b
for dialing.
z
Use the PPPoE encapsulation
mode to encapsulate the
packets.
Refer to 3.6
"Configuring
the PPPoE
mode."
Note:
ISP = Internet Service Provider
IPoA = Internet Protocol over ATM
PPPoE = PPP over Ethernet
PPPoA = PPP over ATM
Caution:
Some parameters are validated only after they are saved and the
HG520b is rebooted. Follow the prompt in the configuration page to
perform this operation.
