13
(3)
In the WAN configuration page, select the
PVC
that needs to
be configured.
(4) Set
Mode
to
Routing
and
set
Encapsulation
to
PPPoA
.
(5)
Configure the relevant parameters according to the values in
the Table 3-3.
(6)
Fill in the username and the password (provided by the ISP).
(7) Click
Submit
.
2. Configuring Your Computer
Configure the network card for your computer, to enable the computer
to automatically obtain information such as the IP address and the
gateway.
3.4 Configuring the IPoA Mode
This section describes the process to configure the HG520b in the
IPoA mode and the process to configure your computer to access the
Internet through the HG520b.
3.4.1 Preparation
Table 3-4 shows the configuration for the IPoA mode.
Table 3-4 Configuration for the IPoA mode
Name
Configuration
VPI/VCI
Provided by the ISP
Mode Routing
Encapsulation IPoA
IP Address
There are two methods to obtain IP
Address:
z
Obtain default gateway automatically
z
Use the static IP address
