Table 4-8
Required data
Name
User Name and
Password Example
Permission Example
converged switching plane
l
User name:
user123
l
Password:
Huawei12#$
Configuration level
Procedure
Step 1
log in to the converged switching plane command-line interface (CLI).
Step 2
On the CLI of the converged switching plane, run the following command to go to the system
view:
<HUAWEI>
system-view
The command output is as follows:
Enter system view, return user view with return command.
Step 3
Go to the AAA view.
[~HUAWEI]
aaa
Step 4
Add a local user on the converged switching plane.
local-user User name password irreversible-cipher Password
For example, run the following command to set the user name to
user123
and the password to
Huawei12#$
in cipher text:
[~HUAWEI-aaa]
local-user user123 password irreversible-cipher Huawei12#$
Info: A new user is added.
NOTE
The user name must contain at least six characters.
Step 5
Set the level of the user
user123
to
2
.
[~HUAWEI-aaa]
local-user user123 level 2
Step 6
Set the user access type.
local-user User name service-type
{ [ terminal | telnet | ftp | ssh ] * | all }
For example, if you want to set the access type of user
user123
to
SSH
, run the following
command:
[~HUAWEI-aaa]
local-user user123 service-type ssh
Step 7
Submit the configuration.
[~HUAWEI-aaa]
commit
Step 8
Query information about all users and check that the new user is successfully created.
[~HUAWEI-aaa]
display aaa local-user
The command output is as follows:
CX320 Switch Module
User Guide
4 Configuring the CX320
Issue 09 (2019-08-02)
Copyright © Huawei Technologies Co., Ltd.
70
