manualshive.com logo in svg

Huawei CX320, Руководство пользователя

Поделиться
Скачать
Huawei CX320 Скачать руководство пользователя страница 65

Figure 4-2

 Network connections

If the 

MGMT

 port on the active MM910 is already connected with a network cable, do

not remove the network cable from the 

MGMT

 port. Otherwise, an active/standby

switchover of the MM910s will be triggered, which may cause network interruption.

NOTE

The MM910 management port is provided by either of the following modes:

–

An Ethernet port on the switch module in slot 

2X

 or 

3X

.

However, if a CX910/CX911/CX912/CX913 is in slot 2X or 3X, only a GE port can be used;
if a CX920 is in slot 2X or 3X, only a 10GE port can be used. The CX910/CX911/CX912/
CX913 are not recommended for providing the management port of the management module.

–

MGMT

 port on the MM910 panel

–

For the MM910 (U54)2.25 or earlier, the management port is provided by the switch module
by default. For the MM910 (U54)2.26 or later, the management port is provided by the
MM910 by default. For details about how to query the MM910 version, see 

MM910

Management Module V100R001 User Guide

.

–

You can run the 

outportmode 

command to change the mode in which the MM910

management port is provided. If the switch module in slot 2X or 3X is used to provide the
management port, do not connect the MM910 

MGMT

 port and the switch module ports to the

same network. Otherwise, a network storm will occur and the network will be interrupted. For
details, see 

MM910 Management Module V100R001 Command Reference

.

l

Connect the network port of the local PC to the 

MGMT

 or 

STACK

 port of the active

MM910.

–

If the 

MGMT

 port of the active MM910 is available, use this port. 

Figure 4-3

shows the connection.

CX320 Switch Module
User Guide

4 Configuring the CX320

Issue 09 (2019-08-02)

Copyright © Huawei Technologies Co., Ltd.

59

Содержание CX320


















































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды