Restoring the Factory Defaults
5
Note
To avoid the configuration conflict, only one
user is allowed to log in to the management
page at a time.
Accessing the Internet
1
Click
Connection
.
Note
• If you are required to enter the PIN code,
enter the correct one. If you fail to enter the
correct PIN or PUK code, the network-related
functions are unavailable.
• The SIM card is supplied by the service
provider. For details, contact your service
provider.
• When the
Save PIN Code
check box is
selected, the
Auto validation
is enabled.
• If
Auto validation
is enabled, the PIN code is
recorded and automatically validated after
each restart.
2
If
PPP Connection
is
Manual
, click
Connect /
Disconnect
to connect to or disconnect from the
network.
Note
If
PPP Connection
is
Auto
or
On
Demand
, refresh the page to view the
current network connection status.
3
Wait for several minutes. If you are notified that
the connection is successful, you can start the
browser and enter the website address to
access the Internet.
Restoring the Factory Defaults
If you need to reconstruct the network or you forget
the changes of some parameters, you can choose to
restore factory defaults and reconfigure the device.
Reset
: Press and hold it to restore the factory
defaults.
Note
: After this operation, all configurations are
restored to the defaults.
Reset