Huasun FLC-2500, Руководство пользователя

Страница: 9 / 19

9
2) Sender setup
Display mode : if PC works under the 1024*768 resolution, nothing changes; otherwise
choose the right resolution of PC, then click “Save on sender”. (Remarks:1024*768
resolution is recommended)
Default : when the LED display brightness di
m suddenly without any reason,
click Default and Save on sender will solve the dim problem.
3) Receiver setup
Intelligent setup: There are 7 steps. (Some steps will be skipped according to different
display panel.) By doing the intelligent setup, Linsn controllers will fetch the info of
the led display, such as scan mode, chip decode, module size, signal trend etc, then
apply the suitable connecting program from the firmware. Before doing the intelligent
setup, user must collect the info of the following picture: the info can also get from the
led display manufacturer.
Load from files: If user get a .RCG file from the manufacturer or user have generate
a .RCG file by doing intelligent setup before, for the same kind led display, user can
upload the .RCG file and make the display work fine.
Save on files: If user has made a successful intelligent setup, there should be a RCG
file generated. By saving on files, user can save the .RCG file.
Send to receiver: After finishing the intelligent setup, or change any parameters, or
upload any .RCG or .CON files, user has to click “send to
receiver” to take effect
on the led display.