SCH-200 Imaging Unit Series
│
Quick Installation Guide
Page 5
1.3
FCC Compliance Statement
Information to the user: This unit has been tested and found to comply with the
limits for a Class B digital device pursuant to Part 15B of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This unit generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the manual, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this unit does cause harmful interference to radio or television reception, which
can be determined by turning the unit off and on, the user is encouraged to try to
correct the interference. For example, try reorienting or relocating the receiving
antenna, increasing the separation between the unit and receiver, or connecting the
unit to an outlet on a different circuit.
CAUTION
Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the unit.
1.4
CE Statement
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation. The manufacturer
declares that the unit supplied with this guide is compliant with the essential
protection requirements of EMC directive and General Product Safety Directive
(GPSD) conforming to requirements of standards EN55022 for emission, EN 55024 for
immunity.
