SCH-200 Imaging Unit Series
│
Quick Installation Guide
Page 19
6.
Select the unit with the Imaging Unit model SCH-200. The following
Information appears in the camera configuration window.
Figure 12: Configuring a New IP Address
7.
Enter the new IP address in the field designated in Figure 12 above.
Click
Save
to activate the settings.
8.
Wait a few seconds while the imaging unit reboots with the new IP
address, and exit the utility.
NOTE
In order to recall the imaging unit’s IP address when necessary, stick a label with the IP address
on the imaging unit.
END OF DOCUMENT
