SCH-200 Imaging Unit Series
│
Quick Installation Guide
Page 11
Adjust the position and angle of the imaging unit as shown in Figure 4 below.
Figure 4: Adjusting the Imaging Unit
NOTE
Depending on the mounting surface’s material, different screws and anchors than those
supplied may be required.
HAZARD: The imaging unit is heavy and could cause damage or personal
injury if it falls.
To prevent the imaging unit from falling, ensure that it is mounted firmly to
a wall or a pole.
Make sure that a safety wire connects the housing and the cover to prevent
damage or injury if the event that the unit detaches from the wall.
