HTP SuperStor Ultra SSU-119 Скачать руководство пользователя страница 22

lp-83 Rev. 006 Rel. 005 Date 12.18.17

22

heater with an empty or partially empty tank (“dry firing”), or failures 

caused by operating the water heater when it is not supplied with 

potable water, free to circulate at all times.

16. Failure of the heater due to the accumulation of solid materials 

or lime deposits.

17. Any damages or failures caused by using any models other than 

SSU / SSU-C 80 and 119 gallon models in live steam applications.

18. Any damages or failures caused by live steam pressures in excess 

of 10 PSI in the indirect heat exchanger.

19. Any damage or failure resulting from improper water chemistry.  

WATER CHEMISTRY REQUIREMENTS (RESIDENTIAL USE) – Water pH 

between 6.5 and 8.5. Operating temperatures not exceeding 140

o

F. 

Hardness less than 12 grains (200 mg/L). Chloride concentration less 

than 100 ppm (mg/L). TDS less than 500 ppm (mg/L). (COMMERCIAL 

USE) - Water pH between 6.5 and 8.5. Hardness less than 7 grains (120 

mg/L). Chloride concentration less than 100 ppm (mg/L). TDS less 

than 500 ppm (mg/L).

20. Any damages, malfunctions, or failures resulting from the use of 

dielectric unions.

21. Production of noise, taste, odors, discoloration, or rusty water.

22. Water heaters replaced for cosmetic reasons.

23. Components of the water heater that are not defective, but must 

be replaced during the warranty period as a result of reasonable 

wear and tear.

24. Components of the water heater that are subject to warranties, 

if any, given by their manufacturers; HTP does not adopt these 

warranties.

25. Damages, malfunctions, or failures resulting from the use of any 

attachment(s) not supplied by HTP.

26. Water heaters installed outside the fifty states (and the District of 

Columbia) of the United States of America and Canada.

27. Water heaters moved from the original installation location.

28. Water heaters that have had their rating labels removed.

PROCEDURES FOR WARRANTY SERVICE REQUESTS

Any claim for warranty assistance must be made promptly. Determine 

if the water heater is “in-warranty” (that is, within the applicable 

warranty period) by reviewing a copy of the original sales receipt or 

warranty registration. The Owner must present a copy of the original 

sales receipt or warranty registration for a warranty service request.

If the water heater is “in-warranty”, contact the retailer from whom 

the water heater was purchased (or the installer) for assistance. 

Be prepared to provide the retailer or installer with a copy of the 

original receipt, complete model and serial numbers, and the date 

of installation of the water heater, in addition to explanation of the 

water heater problem.

Warranty coverage is subject to validation of “in-warranty” coverage 

by HTP claims department personnel. All alleged defective or 

malfunctioning components must be returned to HTP via the local 

distribution channels where original purchase was made. 

NOTE: Any 

components or heaters returned to HTP for warranty analysis 

will become the property of HTP and will not be returned, even 

if credit is denied.

 If all warranty conditions are satisfied, HTP will 

provide replacement components to the retailer.

For questions about the coverage of this warranty, please contact HTP 

at the following address or phone number: HTP, 272 Duchaine Blvd, 

New Bedford, MA, 02745, Attention: Warranty Service Department, 

1(800) 323-9651.

SERVICE, LABOR AND SHIPPING COSTS

 

This limited warranty does not extend to any shipping charges, 

delivery expenses, or administrative fees incurred by the Owner 

in repairing or replacing the water heater or component(s). This 

warranty does not extend to labor costs beyond the coverage 

specified in this warranty document. All such expenses are the 

Owner’s responsibility.

LIMITATIONS OF YOUR HTP WARRANTY AND REMEDIES

THE FOREGOING WARRANTIES ARE EXCLUSIVE AND ARE GIVEN AND 

ACCEPTED TO THE FURTHEST EXTENT UNDER APPLICABLE LAW IN LIEU 

OF ANY AND ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING 

WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY 

AND FITNESS FOR A PARTICULAR PURPOSE AND ANY OBLIGATION, 

LIABILITY, RIGHT, CLAIM OR REMEDY IN CONTRACT OR TORT, WHETHER 

OR NOT ARISING FROM HTP’S NEGLIGENCE, ACTUAL OR IMPUTED. THE 

REMEDIES OF THE OWNER SHALL BE LIMITED TO THOSE PROVIDED 

HEREIN TO THE EXCLUSION OF ANY OTHER REMEDIES INCLUDING 

WITHOUT LIMITATION, INCIDENTAL OR CONSEQUENTIAL DAMAGES, 

SAID INCIDENTAL AND CONSEQUENTIAL DAMAGES INCLUDING, BUT 

NOT LIMITED TO, PROPERTY DAMAGE, LOST PROFIT OR DAMAGES 

ALLEGED TO HAVE BEEN CAUSED BY ANY FAILURE OF HTP TO MEET ANY 

OBLIGATION UNDER THIS AGREEMENT INCLUDING THE OBLIGATION 

TO REPAIR AND REPLACE SET FORTH ABOVE. NO AGREEMENT VARYING 

OR EXTENDING THE FOREGOING WARRANTIES, REMEDIES OR THIS 

LIMITATION WILL BE BINDING UPON HTP. UNLESS IN WRITING AND 

SIGNED BY A DULY AUTHORIZED OFFICER OF HTP. THE WARRANTIES 

STATED HEREIN ARE NOT TRANSFERABLE AND SHALL BE FOR THE 
BENEFIT OF THE OWNER ONLY.

NO OTHER WARRANTIES

This warranty gives the Owner specific legal rights. The Owner may also 

have other rights that vary from state to state. Some states do not allow 

the exclusion or limitation of incidental or consequential damages so this 

limitation or exclusion may not apply to the Owner.

These are the only written warranties applicable to the water heater 

manufactured and sold by HTP. HTP neither assumes nor authorizes 

anyone to assume for it any other obligation or liability in connection 

with said water heaters. 

HTP reserves the right to change specifications or discontinue models 
without notice.

Содержание SuperStor Ultra SSU-119
























Отзывы: