HTP PH130-119S, Установка, эксплуатация и обслуживание

Страница: 5 / 31

5
HTP CUSTOMER INSTALLATION RECORD FORM ........................................................................ 31
PART 1: GENERAL SAFETY INFORMATION
INSTALLER – Read all instructions in this manual before installing. Perform steps in the order given.
USER – This manual is for use only by a qualified installer/service technician. Refer to user’s information
manual for your reference. Have this heater serviced/inspected by a qualified service technician annually.
FAILURE TO ADHERE TO THE GUIDELINES ON THIS PAGE CAN RESULT IN SUBSTANTIAL
PROPERTY DAMAGE, SEVERE PERSONAL INJURY, OR DEATH.
A. LOCAL INSTALLATION REGULATION
Installation of this solar water heater may be governed by individual local rules and regulations for this
type of product, which must be observed. Always use the latest edition of codes. The installation,
adjustment, service, and maintenance of the solar water heater must be done by a licensed professional
who is qualified and experienced in the installation, service, and maintenance of solar hot water systems.
B. WATER TEMPERATURE ADJUSTMENT
If the solar water heater is going to have a set temperature above 120
o
F, you must use an ASSE 1017
rated mixing valve to avoid severe burns or death from scalding temperature.
Households with small children, disabled, or elderly persons may require a 120
o
F or lower
temperature setting to prevent scalding.
C. FREEZE PROTECTION/WINTERIZING
NOTE: Consider piping and installation when determining heater location.
To winterize the heater, drain the entire system. Pump one gallon of non-toxic, NSF food grade propylene
glycol, FDA rated as GRAS (Generally Recognized As Safe), into the tank. Consult the glycol
manufacturer for specific instructions on concentration percentage as well as freeze and burst protection
methods. Check the concentration of antifreeze to assure protection is adequate to protect the bottom of
the heater from freezing.