HTP MicroCut 45 DV, Руководство оператора

Страница: 10 / 23

5
4. Operation
4.1 Layout Of The Front And Rear Panel
Figure 1.
1.
LCD - Display machine status, such as the cutting current, air pressure, cutting
mode, etc
2.
Encoder - Adjust the cutting current and air pressure
3.
Function Button - Select cutting mode, switch between first and second menu.
4.
Over-Heat Alarm - When over-heating, the yellow light will be on.
5.
Power Light – A solid green light indicates the power is on.
6.
Cutting Torch Connector
7.
Torch Central Connector
8.
Positive Output For GROUND Cable
9.
Fan
10.
Power Cable - Connected to the appreciate power supply
11.
Power Switch - Turn on or off the power source
12.
Compressed Air Connector