Htek UC926E, Руководство по настройке

Страница: 9 / 12

Enter Htek phone MAC address. Example: 001FC1123456. MAC address can be found at
the back of the phone.
Click on the Save button.
■
Registering Phone
This chapter describes how to register Htek phone using DHCP & TFTP or HTTP.
The following topics are covered:
DHCP
■
TFTP or HTTP
■
DHCP
Configure DHCP
Make sure your DHCP router is configured to use option 66 to automatically instruct phones
■
with the URL for auto provisioning. For more information refer to your router documentation
or contact your network administrator.
Phone first boot or user initiated reboot
Auto provisioning process will start during phone first boot or after reboot process has been
■
initiated by user. DHCP server will instruct the phone where from to pickup appropriate
configuration file. If everything is done as above described, you should have successfully
registered your phone to PBXware. Dial *123 to verify registration.
TFTP or HTTP
Open a new browser window and enter your phone IP address, e.g. http://192.168.1.22.
■
Enter username and password and press Confirm button. NOTE: Factory default login
■
details are username: admin and password: admin.
Click on Management tab.
■
Click on Auto Provision link in the left hand navigation menu.
■
Choose what server type you intend to use: HTTP or Trivial FTP. NOTE: Our
■
recommendation is to use the HTTP.
If you choose to use server type HTTP enter Hostname or IP Address, followed
then by /prov.
Example for Hostname: abc.bicomsystems.com/prov