Conference set HT‐6800/HT‐9100 User manual
14
c) Volume
menu
d)
System setup menu
Code Setup :
Chairman mic diplay
Delegate mic display
All the mic have a built-in speaker returning the debates much clearer. The max
volume for all mic is adjusted from main unit but you can also adjust the volume of
each desk individually. Press on the
b and - touch screen to increase or
decrease the volume of the speaker then press on button OK to leave the menu
Each mic has a number ID which is affected (very important to setup the auto-
track function (this function will be explained later).
Chairman mic:
- The president starts the setup of the mic by selecting the number
corresponding to the chairman mic. For that, use the b and - touch
screen. In general, you assign number 1 to the chairman mic.
- Once the selected number, press on button OK
- The following codes are transmitted to all the delegate mic.
- When all the mic ID are affected, press on the button RETURN for exit of the
menu
Delegate mic :
- This message is displayed on all the delegate mic touch screen. Presses the
OK button of the corresponding mic to the affected the number. In our
example, Press the OK button of the mic which you want to assign to number
5. Once carried out, you turn over to the first page of the mic
- The other mic are always this message posted but with an incremented
number of a unit. Press then on button OK of the mic concerned and so on
until all the mic are assigned to a number.
- To leave the menu, press on the button RETURN
- Please restart the system to save the system code setup of mic