Usage
HTC GL 40 D
12
2.0
When the dust extractor is in the operating position, and you want to lower it to the
transport position, do as follows:
•
Lift up the cylinder packet a little and then allow the whole guide packet,
including the cylinder packet, to drop down in the guide slot provided.
When the dust extractor is in the operating position, and you want to lower it to the
transport position, do as follows:
Figure 4-1. Transport position
Warning!
There is a risk of crush injuries while lowering to the transport position. Make
sure your hands are not in the way when the guide packet drops into the slot.
4.2.2
The dust extractor's operating position
When the dust extractor is in use, it must be in the operating position, see Figure 4-2,
page
•
Raise the cylinder packet up from the transport position, by gripping it under the
cylinder section and pushing up the whole guide packet in the guide slot. Make
sure that the cylinder packet drops in and lies in the guide slot's upper position,
see position A in Figure 4-2, page
