HTC Desire 500, Руководство по обслуживанию

Страница: 45 / 52

45
Maintenance
Daily:
• Clean the machine if it has been used for wet grinding or mist spray.
• Check wear on the tools – abnormal or uneven wear can indicate damage to the grinding
holders.
• To avoid failure, check the tool holder and grinding holder for damage or cracks. If any dam-
age has occurred, change the parts.
Weekly:
• Clean the machine.
• Check the grinding holders. Remove the tools and run the machine off the ground on the
lowest speed. If the grinding holders oscillate or wobble considerably they are damaged.
Overhaul all grinding holders at the same time.
• Check that the upper belt is intact. Try to turn the large disk in any direction.
It should be stiff. If it turns freely then the belt has broken.
Each month (or 100 hours):
• Clean the machine.
• Check the grinding holders.
• Screw into place everything that can have vibrated loose.
• Lift off the cover and check that it is intact.
• Scrape and vacuum the parts that are enclosed by the cover. Check the upper belt. Change
as needed.
• Check the seals of the shafts the upper belt runs on. Change as needed. (On the HTC 800
models built after year 2000, only the shaft journal can be changed).
• Test run and listen for any sounds from the bearings.