Introduction
HTC 650 E Classic
4
3.0
10.
Weight (kg)
11.
Address field
1.8
Handling and storage
The equipment should be stored in a heated, dry area when not in use. Otherwise it may
be damaged by condensation and cold.
When lifting the grinder, lifting straps must be used. These must be attached
well-secured in the lifting eyes provided. Only use lifting straps approved for lifting
equipment.
1.9
Vibration and noise
Warning!
Always use hearing protection when using the machine.
1.9.1
Hand and arm vibrations
Hand and arm-weighted vibration level [m/s² for HTC 650 Classic E have been
measured using equipment approved in accordance with ISO 5349-1:2001.
Measurement uncertainty for the measuring equipment is given as +/- 2%.
The machine has been tested in accordance with ISO 5349-2:2001 and ISO 20643:2005
in order to identify the operations that contribute to the most frequent vibration
exposures. At vibration levels > 2.5 m/s², the exposure time should be limited in
accordance with the table below. For vibration levels > 5 m/s², immediate measures
must be taken by the employer to ensure that the exposure time does not exceed the
time specified in the table below.
Identified work conditions Measured values
[m/s²]
Daily permitted exposure
(number of hours)
Grinding/polishing
2,28
Unrestricted
Floor preparation (T-rex)
5,58
6,42
1.9.2
Sound power level
This machine is tested for noise in accordance with ISO 3741. For information on the
sound power level, see the table in chapter Tekniska data, page
