T2000-T2100
EN – 15
5.2.4. HOLD
Shortly pressing the
HOLD
key activates the
“HOLD” function and freezes the result on the
display (see Fig. 14). To go back to the normal
measuring mode press the
HOLD
key again or
press the
A
(T2000)
(
RS232
) (T2100) or
key (toquit “HOLD” and enter resistance or
current measuring mode).
Fig. 14
5.2.5. MEM
Shortly pressing the
MEM
key activates the
“MEM” function, and the result on the display is
saved in the internal memory (see § 5.5.1)
Fig. 15
5.2.6. Anomalous situations
While measuring, the indication “
OL
” means
that the resistance measured exceeds the
maximum value which can be measured by the
instrument (see Fig. 16).
Fig. 16
The symbol “
” indicates sound function is
turned on, and the symbol “
” indicates
resistance alarm is turned on if the resistance
value is higher than the set resistance threshold,
the alarm sound and the symbol “
” flashes..
For managing the alarm thresholds see § 5.6
Fig. 17
While measuring, the symbol “NOISE” means
that the instrument has detected a disturbance
current on the resistance measurement loop.
Fig. 18
