HSU 500A, Инструкция по эксплуатации

Страница: 7 / 16

2
Connecting To Your System
Connecting to a Dolby Digital or DTS system
All Dolby Digital and/or DTS processors have subwoofer/LFE outputs. If you decide to use the
crossover in the processor, connect your receiver or processor subwoofer/LFE out to the line level input
of your 500-Watt amplifier via a Y adapter (splitter) to both line-in on the back of the 500-Watt amplifier.
Set the crossover frequency of your processor appropriately for your main speakers and set the over
switch on the back of the 500-Watt amplifier to out .
If your processor does not allow you to select the optimal crossover frequency, follow the
instructions below for connecting to a system with separate components.