HSU 500A, Инструкция по эксплуатации

Страница: 10 / 16

5
Connecting the Amplifier to the Subwoofer
Run a long speaker cable from the 5-way gold-plated binding posts on the subwoofer amplifier to
each of the 5-way gold-plated binding posts on the bottom of the subwoofer. Use 12 AWG for runs over
25 feet, while 14 AWG is sufficient for shorter runs.
Connecting Two Subwoofers
To connect a second subwoofer to the amplifier, simply run another set of speaker wires from the
amplifier s second set of subwoofer output binding posts to the second subwoofer s binding posts. If the
two subwoofers are next to each other, you can also run one cable to the first subwoofer, and a short
cable from the first subwoofer to the second subwoofer. If you are running one cable to two subwoofers,
use heavier wires 10 AWG instead of 12 AWG, 12 instead of 14 AWG for the long run. The short wires
can be a 14 or 16 AWG wire.
Finishing Up
Check to see that the red voltage selector switch on the back of the amplifier is set to the correct
voltage, if you have a dual-voltage version. It is set to 120V by default. Connect the subwoofer amplifier's
power cord to an AC outlet.
Congratulations, you have successfully set up your new subwoofer amplifier. For recommended
testing and listening material, refer to Appendix B of your Hsu subwoofer manual. Also, try out the test
CD-R that was included with your subwoofer.