21
WFS 1545 Operations Manual
The Alarm Silence mode will clear after 60 seconds the tone will sound. The Alarm Silence
can be selected unlimited number of times.
ii.
F3 MSG (Message)
Pressing F3 will call up the Message Page. This page displays the alarm status and indicates
which fault or faults triggered the alarm. If there are no faults this page will be blank. We
recommend that this is the normal display mode.
The fault will continue to display until the Reset Button is pushed. This is true even if the
fault has cleared itself.
E.g. the reservoir runs low and the Low Water Class 1 alarm is triggered. The pumps will stop
and the alarm will sound. Before someone can come to inspect the unit the auto-fill valve
restores the reservoir to the proper level. The fault has cleared. However, the display will
still show the cause of the alarm “LOW WATER” and the pumps will not start until the reset
button is pressed.
