HSP STARIS Sia+ Скачать руководство пользователя страница 23 | Manualshive

Страница: 23 / 53

background image

5.1.2.2 One lifting device (crane etc.)
► Attach lifting accessories from crane shackle to flange.
► Suspend a pulley to the same shackle.
► Guide the lifting accessories on the pulley to the bushing head.
► Tighten the pulley until the length of both lifting accessories is such that the crane shackle

is positioned above the center of gravity of the bushing.

5.1.2.3 One lifting device (crane etc.) + mechanic
Small bushings (weight < 50 kg) must only be lifted using one lifting device and supported by

a mechanic.
► Guide the lifting accessories from the crane shackle to the bushing head.
► Hold the bushing at the flange with your hand.

5.1.3 Putting the bushing down

NOTICE

Material damage by putting the bushing down improperly

If a bushing with silicone insulator is put down on the insulator, the sheds may suffer

damage.

► Always put the bushing with silicone insulator down only on the head and on the

flange.

NOTICE

Material damage by putting the bushing down incorrectly

If the bushing is put down with one end on the floor, then invisible cracks may be created

by impacts.

► Never put the bushing down on the floor.

► Put the bushing down properly on bearing supports (supported at the same points as in

the crate).

Range STARIS®-Sia+

23/53

«
...
21
22
23
24
25
...
»

Содержание STARIS Sia+






















































Отзывы:

Нет отзывов

Похожие инструкции для STARIS Sia+

Бренд: vc999 Страницы: 55

XTCEH600 Series

Бренд: Eaton Страницы: 6

Diverter SH 1500

Бренд: Interroll Страницы: 76

Бренд: R.V.R. Elettronica Страницы: 34

Бренд: Danfoss Страницы: 10

NORTON clipper CR16

Бренд: SAINT-GOBAIN Страницы: 15

Бренд: Artila Страницы: 19

Tripod Turnstile

Бренд: ZKTeco Страницы: 10

Бренд: Berker Страницы: 3

Rotavapor R-187EL

Бренд: Buchi Страницы: 42

Бренд: PCB Страницы: 16

Бренд: Microcanner Страницы: 32

Бренд: Holmatro Страницы: 148

Бренд: ABB Страницы: 108

Бренд: ABB Страницы: 111

Бренд: ABB Страницы: 108

Бренд: ABB Страницы: 108

Бренд: Advanjet Страницы: 30

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды