english
english
12
Classic Nanoshred 726
12/2010
Jam
Notice!
Do not press dashed arrow button and
green arrow button alternately forwards and
backwards. Cutting unit can be damaged.
• Press rocker switch
.
Tape is pus hed out.
• Press rocker switch
.
• Feed only one tape successively.
Cut material container full
Red LED lights.
Machine switches off
NOTICE! Empty the cut material container
immediately, because if it is too full,
malfunctions can occur in the cutting
system.
• Switch equipment off. To do this
tap rocker switch
.
• Empty the cut material container.
Drawer is not inserted completely
Red LED lights.
Machine switches off.
• Check whether drawer is insert-
ed completely.
For all other malfunctions, check whether
the motor was overloaded before contacting
our customer service. Let the shredder cool
down for approx. 15 – 20 mins. before using
it again.
T
S
T
6 Troubleshooting
Switch off the shredder and pull out the
mains plug. When cleaning only use a soft
cloth and a mild soap-water solution. How-
ever, no water must enter the equipment.
Lubricate the machine with special oil
biweekly:
• Switch the machine off:
Tap rocker switch
.
• Spray special cutting block oil
through feed opening across the
whole width of the cutting system
blades.
• Run cutting system backwards
(
).
Particles are shaken off.
T
T
7 Cleaning and maintenance
8 Disposal / Recycling
Electrical and electronic old de-
vices contain a variety of valuable
materials, but also hazardous
substances which were required
for function and safety. Incorrect
disposal or handling can be dan-
gerous to your health and the environment.
Never dispose of old devices in the house-
hold waste. Observe the current applicable
regulations and use the collection points for
returning and recycling electric and elec-
tronic devices. Dispose of all the packaging
materials also in an environmentally-respon-
sible way.
http://www.monomachines.com/
http://www.monomachines.com/
