HSK HSK10 D, Руководство пользователя

Страница: 26 / 41

Bedienungs- und Wartungsanleitung für Handschweißextruder Serie HSK10 DE

HSK Kunststoff Schweißtechnik GmbH
26
4.2 Handling of manual welding extruder
First operation of the machine has to be done as per chapter 4.1. The manual welding extruder may
only be guided at the handles fixed to this purpose.
In order to avoid injuries by burning in case of improper handling, the operator has to wear heat-
resisting gloves.
Further on all limbs of the operation staffs have to be covered by appropriate clothes.
If works have to be carried out over head or in narrow places (for ex. gully holes or narrow
receptacles), a second person has to be present as a matter of security.
Please note that a welding with satisfactory results requires a faultless welding wire, a proper pre-
heating and a perfect preparation of the welding.
Please make sure that the welding wire to be used is not too old and was stocked properly.
You will obtain best welding results by using dry and dust free air.
The preparation of the welding will depend on the materials to be welded and the welding geometry.
For any information on the preparation of the welding please refer to existing literature or to the
corresponding directives in the branch.
Existing regulations which have been established for many branches (for ex. DVS regulations)
regarding the manufacture of plastic connections by welding have to be strictly observed.