Ⅶ、
TOOL DISASSEMBLY
WARNING: Always unload a power actuated tool before disassembling,
replacing barrel, cleaning, or assembling.
A. REMOVNG BARREL ASSENBLY
1.
Using screwdriver, lift end of annular spring and rotate spring until stop is
uncovered
(see Figure l).
Annular Spring
Figure 1 — Rotating Annular Spring to Uncover Stop
2.
Push stop towards rear of tool and remove (see Figure 2).
Figure 2 — Removing Stop
3.
Pull barrel assembly out of housing.
4.
Unscrew muzzle cap.
5.
Remove piston assembly from barrel (see Figure 3).
Figure 3 — Removing Piston Assembly from Barrel
Stop
