O p e r a t i o n M a n u a l o f M i n i D o m e C a m e r a
4>.
Install camera.
(Please refer to camera installation for details).
Attention: 1
.
Do not connect the camera and dome device with FFC in a
wrong way.
2. The holes are for different cameras. Please adjust according to
the practical overall dimensions and ensure the fastness when
installation is completed.
5>.
Connect the power of dome device.
At this moment, the self-test (rotation) of dome device and self-test
(there will be image on the monitor) of camera can be seen.
6>.
Set the protocol, baud rate and address of the keyboard
controller identical with those of dome device.
(Please refer to
keyboard controller instruction manual).
7>.
Start testing.
When the entire above are ready, the testing to dome device can be
started.
The directions (up, down, left and right) of the
dome device can be controlled by using the
Keyboard controller, as indicated in the figure.
Note:
the working of dome device is normal
joy stick
8
up
dow
n
n
lef
t
righ
t
