HS LN42, Руководство по эксплуатации

Страница: 11 / 13

O p e r a t i o n M a n u a l o f M i n i D o m e C a m e r a
2
）
Users can set the starting point by pressing “ 52+ENTER” and set the
ending point by pressing “ 53+ENTER” .
3
）
The setting of Pan scan speed: user only need to maintain a certain manual scan
speed for more than 3 seconds and press“ CALL+51+ENTER ”to save this speed as
Pan scan speed, press “ CALL+52+ENTER” to start Pan scan.
4
）
The dwell time of “starting point” and “ending point” of Pan scan is 2 seconds.
5
）
Stop it by operate “Pan”or “Tilt”.(move the joystick of the controller).
III.
Operation instruction about the tour scan movement (Example:Method one)
1.
Auto point by point scan from preset point number 1 to number 16 , if a certain
point is not set or cleared, that point will not be scan when “tour scan” is in
progress.
2.
The dwell time of preset point in tour is 4 seconds.
3.
The defaulted tour function can be executed by inputting
“ 51+ENTER”.
4.
Please refer to the operation manual of keyboard control for the operation of
other six tour tracks.
5.
Stop it by operate “Pan”or “Tilt”.(move the joystick of the controller)
IV.
Home position
（
This means the time duration for the dome device to return to the
No. 1 direction preset position when no-man control occurs
）
(Example:Method one)
1.
Start this function by pressing “ CALL+100+ENTER”.
2.
The time of returning to preset direction position number 1 can be set to 1
minute / 2 minutes / 4 minutes / 8 minutes / 10 minutes by pressing
“ CALL+95+ENTER ” / “ CALL+96+ENTER” / “ CALL+97+ENTER” /
“ CALL+98+ENTER” / “ CALL+99+ENTER”
3.
Disable this function by pressing “ 100+ENTER”
V.
Intelligent three-dimension tour scan setting (Example:Method one)
When the user is monitoring with manual Pan scan, he only needs to maintain the scan
speed for more than 3 seconds to continue the scan speed and direction monitoring,
and then press “ CALL+101+ENTER ” to auto continue the manual Pan scan action.
11