Issue F: 18/02/14
20
SERVICING INSTRUCTIONS
It must be understood that any recommendations made here are in addition to
the standard servicing procedures used by the servicing engineer.
1. A GAS SAFE registered fitter using only original HS GAS parts should
carry out servicing
2. Remove the stove body and glass as described on Page 7 (Removing
the Stove Body).
3. Carefully lift-off the ceramic coals/logs and remove the 3 ceramic
matrices.
4. Using a soft brush, clean away any lint or light carbon soot deposits out
of the gas ports on the burner top plate.
5. Check the TTB bracket inside the draught diverter for blockage and
clean as necessary.
6. Replace the ceramic matrices and loose coals/logs as per the
arrangement instructions (Page 10- Fire-bed Arrangement) using all re-
serviceable coals/logs and any new replacements. Replace the glass
and stove body as described on Page 16 (Re-assembling the Stove).
7. Check the gas operating pressure and pipe work for soundness, carry
out a spillage test and check the condition of the flue system.
