Issue F: 18/02/14
11
3.
Place the front ceramic matrix into
the fire so that it sits between the middle
ceramic matrix and the 2 front tray
supports (Steel brackets at the front of
the tray) shown in diagram A11.
Fitting the Loose Ceramic Coals
4.
The first row of coals consists of 4
small coals and 4 large coals. The first
row of coals are placed so that they sit on
top of the front and middle ceramic
matrices.
Starting with a large ‘diamond shaped’
coal, place the front of the coal on top of
the left hand support leg of the front
ceramic. The back of the coal should rest
on the middle ceramic. Then take a small
coal and place the front of it in the first left
notch in the front ceramic, the back of the
coal resting on the
centre ceramic.
Continue this process, alternating the
coal size until all the 8 coals are placed
as shown in Diagram A12.
Note!
Make sure that the coals do not fall down between the front and middle
matrices.
A gap must be left between the coals to allow the flames to pass through.
5.
The second row of coals
consists of 4 medium sized coals.
They are placed between the large
coals so that they sit on the middle
ceramic, shown in Diagram A13.
Note!
The coals must not block the
gap between the middle and
rear ceramic matrices.
Diagram A11
Diagram A13
Diagram A12
